EasyManua.ls Logo

eFOLDi Lite - Battery Level Indicator; Fitting and Removing the Battery

eFOLDi Lite
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Perform the safety check before each use
- see Safety Guidance section.
Operate the scooter:
To Start - Press the power switch (1) to turn on the scooter.
Choose a gear - Choose the right gear by pushing the Drive/Reverse
(2) button up or down to drive or reverse.
To Drive/Reverse - Press the accelerator lever (4) to drive or re-
verse.
Make sure you do not put too much force on the steering column
and handle bar, which may cause it to bend and loose steering ef-
ciency.
To Stop - Release the accelerator lever (4) to stop the scooter.
Please leave at least 1.5 meters between the scooter and obstacles
on level ground. The stop distance on slopes can be signicantly
greater than on level ground.
Caution:
When travelling at speeds greater than a slow walking pace be sure to
slow down before turning.
The stopping distance on slopes can be signicantly greater than on level
ground; The scooter surface temperatures can increase when exposed
to external sources of heat (e.g. sunlight)
Page 19

Other manuals for eFOLDi Lite