C556 Self Powered Elliptical Fitness Crosstrainer
Page 44
9. Remove the four screws that fasten the wheel assembly to the stairarm. Remove the wheel
assembly from the stairarm.
10. Install the wheel assembly on the replacement stairarm. Install and hand tighten the four the
four screws removed in step 9. Torque the screws to 70 inch pounds.
11. Slide the replacement stairarm onto the crankarm. Replace the retaining clip removed in
step 4.
12. Set the pivot arm connector at it’s mounting position on the stairarm. Replace and torque
the three pivot arm connector bolts to 125 inch pounds.
13. Replace the rear cover.
To Next Page
Loading...