EDGER ATTACHMENT — EA0800 5
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
WARNING: To ensure safety and reliability, all
repairs and replacements should be performed by a
qualied service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they
give are no substitutes for proper accident prevention
measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including all
safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, re,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
The operation of any power tools can
result in foreign objects being thrown into your
eyes, which can result in severe eye damage.
Before beginning power tool operation, always
wear safety goggles or safety glasses with side
shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with
side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Safety Alert
Indicates a potential personal
injury hazard.
Read
Operator’s
Manual
To reduce the risk of injury,
user must read and understand
operator’s manual before using
this product.
Wear Ear
and Eye
Protection
Always wear ear protection and
safety goggles or safety glasses
with side shields and a full
face shield when operating this
product.
Blade length
of edger
Blade length of edger
Keep
Bystanders
Away
The distance between the
machine and bystanders shall be
at least 15 m.
Direction of
Edger Blade
Rotation
Indicates the direction of the
edger blade rotation.
Thrown
Objects
Edger debris can affect
stable footing. Use extreme care when
walking in edging area.
Wear Safety
Footwear
Wear non-slip safety footwear
when using this equipment.
Rotating
Cutting Blade
Do not put hands or feet near or
under rotating parts.
Keep
sufcient
distance
away from
electrical
power lines
To prevent electrocution, do not
operate within 15m of overhead
electrical lines. Contact with or
use near power lines may cause
serious injury or electric shock
resulting in death.
CE
This product is in
accordance with applicable EC
directives.
UKCA
This product is in accordance
with applicable UK legislation.
WEEE
Waste electrical products
should not be disposed of with
household waste. Take to an
authorized recycler.
Noise
Guaranteed sound power
level. Noise emission to the
environment according to the
European community’s Directive.
Original instructions
To Next Page
Loading...