Ego Power+ EA0800 - Packing List

EDGER ATTACHMENT — EA0800 9
EN
Measured sound power level L
WA
92.4 dB(A)
K=2.07 dB(A)
(PH1400E)
90.7 dB(A)
K=1.46 dB(A)
(PH1420E)
90 dB(A)
K=1.3 dB(A)
(PHX1600)
Sound pressure level at
operator’s ear L
PA
79.8 dB(A)
K=3 dB(A)
(PH1400E)
81.2 dB(A)
K=3 dB(A)
(PH1420E)
84 dB(A)
K=3 dB(A)
(PHX1600)
Guaranteed sound power level L
WA
(according to 2000/14/EC)
95 dB(A)
Vibration a
h
Front-assist Handle
1.2 m/s
2
K=1.5 m/s
2
(PH1400E)
1.95 m/s
2
K=1.5 m/s
2
(PH1420E)
1.6 m/s
2
K=1.5 m/s
2
(PHX1600)
Rear Handle
2.2 m/s
2
K=1.5 m/s
2
(PH1400E)
1.66 m/s
2
K=1.5 m/s
2
(PH1420E)
1.53 m/s
2
K=1.5 m/s
2
(PHX1600)
◾ The above parameters are tested and measured
equipped with power head PH1400E/PH1420E/
PHX1600;
◾ The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾ The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
PACKING LIST
PART NAME QUANTITY
Edger Attachment
1
Hex Wrench
1
Multi-Functional Wrench
1
Cotter Pin
2
Operator’s Manual
1
Recommended Blade
PART NAME MODEL NUMBER
Edger Blade AEB0800
DESCRIPTION
KNOW YOUR EDGER ATTACHMENT (Fig.A)
1. End Cap
2. Edger Shaft
3. Blade Guard
4. Blade
5. Depth Adjusting Knob
6. Guide Wheel
7. Hex Wrench
8. Multi-Functional Wrench
9. Depth Adjusting Guide Bar
10. Debris Flap
11. Cotter Pin
12. Screw to lock guide plate in place
13. Guide Plate
ASSEMBLY
WARNING: If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use with this
edger. Any such alteration or modication is misuse and
could result in a hazardous condition leading to possibly
serious personal injury.
WARNING: To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the machine when assembling parts.