To Next Page

To Previous Page

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC 39

SHARPING FREQUENCY

Sharpening the blade twice during a mowing season is usually sufcient under normal

circumstances. Sand causes the blade to dull quickly; if your lawn has sandy soil, more

frequent sharpening may be required.

WHEN SHARPENING THE BLADE:

◾

Make sure that the blade remains balanced.

◾

Sharpen the blade at the original cutting angle.

◾

Sharpen the cutting edges on both ends of the blade, removing an equal amount of

material from each end.

TO SHARPEN BLADE IN A VISE:

1. Remove the blade from the mower

(please see REMOVING THE BLADE).

2. Secure the blade in a vise (Fig. 30).

3. Wear proper eye protection and

gloves and be careful not to cut

yourself.

4. Carefully le the cutting edges of

the blade with a ne tooth le or

sharpening stone, maintaining the

original cutting edge angle.

5. To check the blade balance: clamp

a nail or a screw driver with a round

shank in the horizontal position.

Position the blade so that the nail

or round shank of the screwdriver

supports the blade through its

center hole. Balance the blade horizontally. If either end of the blade rotates

downward, remove some metal from the heavy or lower end until the blade is

balanced. It is balanced when neither end drops (Fig. 31).

6. Replace the blade on the mower and tighten it securely (please see INSTALLING

THE BLADE).

Questions and Answers:

Need help?

Do you have a question about the EGO LM2100 and is the answer not in the manual?

EGO LM2100 Specifications

General