56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC 37
2. Mount the fan and the inner ange onto the motor shaft with the fan blade
towards the deck (Fig. 26).
3. While wearing protective gloves,
position the blade on the inner
ange with the surface stating
“THIS SIDE FACING GRASS” facing
toward the outside (Fig. 27).
4. Align the outer ange with the shaft
and assemble it in place.
5. Mount the bolt into the shaft
and turn it clockwise by hand to
pre-tighten it.
6. While still wearing protective gloves,
hold the blade with one hand and
turn the fan with the other hand to
align the holes in the blade with the
through holes in the inner ange
(Fig. 28).
26
THIS SIDE FACING GRASS
28
Fan blade
Fan
Inner ange
Align the holes
THIS SIDE FACING GRASS
27
To Next Page
Loading...
Need help?
General
