56-VOLT LITHIUM-ION CORDLESS 22” LAWN MOWER — LM2200SP/LM2200SP-FC 31
To stop the mower (Fig. 11)
1. Fully release the bail switch.
2. The electric brake in the Automatic
Braking Mechanism will stop the
blade rotation within 3 seconds of
the blade rotation trigger release.
VARIABLE-SPEED SELF-PROPEL
SYSTEM (FIG. 12)
The mower is equipped with variable-
speed, self-propel capability. To increase
the speed, rotate the self-propel speed dial
forward. To decrease the speed, rotate the
self-propel speed dial backward.
NOTICE: The self-propel function will be
disabled (OFF) when the self-propel speed
control dial is rotated backward to the lowest position.
WHEN THE MOWER IS SHIPPED, THE SPEED DIAL IS FACTORY-SET AT THE LOWEST
(OFF) POSITION. Before starting the self-propel function for the first time, slightly
rotate the self-propel speed dial forward.
This self-propel system is independent from the blade rotation. For example, when you
have completed cutting your lawn, you can use the self-propel to propel the mower
back to your storage location without blade rotation. Or you may choose to operate the
mower as a push mower to maximize battery runtime.
To operate the self-propel system without blades rotation
Slightly rotate the self-propel speed dial forward until a click can be heard, then press
the self-propel trigger(s). There are two self-propel triggers, press either of them to
start the self-propel function.
To turn the self-propel off, release the self-propel trigger.
To operate the self-propel system with the blades rotation
1. Press the power button to illuminate the dashboard.
11
12
Self-propel Trigger
Self-Propel Speed Dial
To Next Page
Loading...
Need help?
General
