56V LITHIUM-ION CORDLESS BRUSHLESS SNOW BLOWER — SNT2100 19
STARTING/STOPPING THE SNOW
BLOWER
CAUTION:
Do not attempt to
override the operation of the safety button
and bail switch.
WARNING:
The operation of a snow
blower can result in foreign objects being
thrown into your or others’ eyes, which can
damage eyes severely. Always wear safety
glasses while operating the snow blower
or while performing any adjustments or
repairs on the snow blower.
WARNING:
Ensure that other people
and pets remain at least 100’ (30m) away
from the snow blower when it is in use.
WARNING:
The auger will continue
to rotate for a few seconds after the snow
blower is turned off. Allow the auger to
stop rotating before starting it again. Do not
rapidly turn the snow blower off and on.
To Start the Snow Blower
1. Ensure that the side rails are
securely locked in the unfolded
position.
2. Attach the battery packs to the
snow blower and close the battery cover.
NOTICE: Make sure that the latch on the snow blower snaps into place and that the
battery packs are secured to the snow blower before operation.
3. Depress the safety button and, with the button depressed, pull the bail switch
upward to meet the handle (Fig. 13 &14).
4. Once the tool powers on, release the safety button and begin operation (Fig. 15).
21
13
15
14
1
2
To Next Page
Loading...
Need help?
General
