56V LITHIUM-ION CORDLESS BRUSHLESS SNOW BLOWER — SNT210020
NOTICE: The tool can only be started by depressing the safety button rst, followed
by squeezing the bail switch; the reverse operation will not start the tool.
To Stop the Snow Blower
1. Fully release the bail switch (Fig. 16).
2. The electric brake in the Automatic
Braking Mechanism will stop the
auger rotation within 3 seconds of
the bail-switch release.
Variable Auger Speed System
(Fig. 17)
The speed of the auger can be adjusted to
control the throwing distance as you want.
1. To increase the speed, move the
speed-adjustment lever forwards.
2. To decrease the speed, move the
speed-adjustment lever backwards.
ADJUSTING THE CHUTE
The chute can be adjusted to change
both the direction and the distance of the
discharged snow to assist you in moving
snow away from one area and placing it
in another.
The direction of snow removal can be
adjusted up to 180° (Fig. 18).
1. Push the chute rotation handle
forward to rotate the chute to the
left.
2. Pull the chute rotation handle backward to rotate the chute to the right.
16
Bail Switch (Fully released)
Safety Button
(Fully released)
17
Variable Auger
Speed Adjustment
18
Chute
Rotation
Handle
Chute