EGO POWER + SNT2100 User Manual

56V LITHIUM-ION CORDLESS BRUSHLESS SNOW BLOWER — SNT2100 27
2. Turn the snow blower on its side
(Fig. 24).
3. To reduce the risk of injury, please
wear gloves rst and then use a
4mm hex wrench to remove the
5 bolts (Fig. 24). Detach the worn
scraper bar from the snow blower
(Fig. 25).
4. Install the new scraper bar and
fasten it securely to the snow
blower with the 5 bolts (Fig. 24).
25
24
Bolt
Scraper Bar

EGO POWER + SNT2100 Specifications

General

Brand	EGO
Model	POWER + SNT2100
Category	Snow Blower
Language	English