EGO POWER + STA1700 - Specifications

LINE TRIMMER ATTACHMENT — STA1700 9
EN
SPECIFICATIONS
Cutting Mechanism LINE-IQ FEEDING
Line Diameter
2.4mm nylon
twist line
Cutting Width 43cm
Maximum Speed 5400min
-1
Weight (Without battery pack) 1.58kg
Recommended Operating
Temperature
0°C-40°C
Storage Temperature -20°C-70°C
Measured sound power level L
WA
94.02 dB(A)
K=0.72 dB(A)
(PH1420E)
92 dB(A)
K=3.1 dB(A)
(PHX1600)
Sound pressure level at operator’s
ear L
PA
82.7 dB(A)
K=3 dB(A)
(PH1420E)
86 dB(A)
K=3 dB(A)
(PHX1600)
Guaranteed sound power level L
WA
(measured according to 2000/14/EC)
96 dB(A)
(PH1420E)
96 dB(A)
(PHX1600)
Valuation of
vibration a
h
Front-assist handle
4.06 m/s
2
K=1.5 m/s
2
(PH1420E)
4.33 m/s
2
K=1.5 m/s
2
(PHX1600)
Rear handle
3.91 m/s
2
K=1.5 m/s
2
(PH1420E)
2.37 m/s
2
K=1.5 m/s
2
(PHX1600)
◾ The above parameters are tested and measured
equipped with power head PH1420E/PHX1600;
◾ The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one machine with another;
◾ The declared vibration total value may also be used in
a preliminary assessment of exposure.
WARNING: The vibration and noise emissions during
actual use of the machine can differ from the declared
values depending on the ways in which the machine is
used especially what kind of workpiece is processed;
and of the need to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the machine
is switched off and when it is running idle in addition to
the trigger time).
PACKING LIST (FIG.A)
DESCRIPTION
KNOW YOUR LINE TRIMMER ATTACHMENT (Fig.A)
1. Guard
2. Line-cutting Blade
3. Release Tab
4. Cutting Line
5. Trimmer Head (with LINE-IQ Feeding)
6. Line-loading Button
7. End Cap
8. String-trimmer Shaft
9. 4 mm Hex Key
WARNING: Never operate the machine without the
guard rmly in place. The guard must always be on the
machine to protect the user.
ASSEMBLY
WARNING: If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product
or create accessories not recommended for use with this
line trimmer. Any such alteration or modication is misuse
and could result in a hazardous condition leading to
possibly serious personal injury.
WARNING: Do not connect to power head until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.