Why is my EGO Power+ HTX6500 making excessive noise and vibration?
Excessive vibration or noise from your EGO Trimmer can be due to several factors: * Dry or corroded blades: Lubricate the blades. * Loose blade bolts: Tighten the blade bolts using an appropriate hex wrench, turning them clockwise.
What to do if my EGO Trimmer does not work?
If your EGO Trimmer isn't working, there could be several reasons: * The power cord from the battery may not be correctly attached. Reinsert the power cord plug, making sure the GREEN seal on the plug completely disappears into the socket. * There might be no electrical contact between the trimmer and the power cord. Check all contacts and reconnect them. * The battery pack might be depleted. Charge the battery using the appropriate charger for your battery type. * The lock-off switch might not be in the 'ON' position. Ensure it is before starting. * The two switch levers might not be pressed simultaneously. Press the front and rear switch levers together after setting the lock-off switch to 'ON'. * The battery or trimmer might be too hot. Disconnect the battery and allow both...
Explains the meaning of various safety alert symbols used in the manual.
Safety precautions related to the work environment, cleanliness, and avoiding hazards.
Guidelines for safe operation, handling, and maintenance of power tools.
Instructions on how to attach and detach the battery pack for operation.
Guidance on how to properly grip and hold the hedge trimmer for safe operation.
Procedures for safely starting and stopping the hedge trimmer.
General| Type | String Trimmer |
|---|---|
| Cutting Width | 15 inches |
| Line Diameter | 0.095 inches |
| Handle Type | Adjustable |
| Motor Type | Brushless |
| Power Source | Battery |
| Voltage | 56V |
| Cutting Swath | 15 inches |
| Line Feed | Bump Feed |
| Battery | 56V Lithium-ion |
| Blade Speed | 7, 000 RPM |
| Warranty | 5 years |
To Next Page
