EGO SNT2400 User Manual

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC12
WARNING:
The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.
Safety Button
The safety button must be pressed down before the motor can be started.
WARNING:
The safety button is safety device. Never attempt to bypass its
operation.
Auger-Switch Trigger
Engages and disengages the motor. It can be working after pressing the safety button.
Auger-Speed-Control Lever
Adjusts the auger speed in order to adjust the throwing distance.
Self-Propel Trigger
Turns the self-propel function ON and OFF.
Self-Propel Speed-Control Lever
Increases or decrease the self-propel speed.
Chute-Rotation Handle
Rotates the chute so that the user may direct the discharged snow as desired. The
handle allows the chute to rotate from left 100° to right 100°.
Chute-Deector Handle
Adjusts the angle of the chute deector and the height of the discharge stream.
LED Headlights/Sidelights
This feature provides extra light for increased visibility.

EGO SNT2400 Specifications

General

Stage Type	Two-stage
Clearing Width	24 inches
Battery Voltage	56 V
Auger Material	Steel
Drive System	Self-Propelled
Speed Control	Variable Speed
Intake Height	20 inches
Throwing Distance	50 feet
Number of Batteries	2
Chute Control	Remote
Speed Settings	Variable
Headlights	LED
Chute Rotation	200 degrees