SNOW SHOVEL ATTACHMENT — SSA1200/SSA1200-FC 15
4. Pull the shaft of the snow shovel attachment to verify that it is securely locked
into the coupler. If not, rotate the snow shovel shaft from side to side in the
coupler until a clear “CLICK” sound indicates that it is engaged.
5. Tighten the wing knob securely.
WARNING: Be certain that the wing knob is fully tightened before operating
the equipment; check it periodically for tightness during use to avoid serious personal
injury.
2a
Arrow on the Coupler
Arrow on the Attachment Shaft
Attachment Shaft
Shaft-Release Button
Power-head Shaft
Wing Knob
2b
Red Line
Red Line
REMOVING THE ATTACHMENT FROM THE POWER HEAD
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Press the shaft-release button and, with the button depressed, pull or twist the
attachment shaft out of the coupler.
To Next Page
Loading...
Need help?
General