EGO ST1300E - Troubleshooting; Line Trimmer Fails to Start; Line Trimmer Stops While Cutting; Trimmer Head Line Advancement Issues

8. Loosen the eleven screws in the rear housing set, open the housing.
NOTICE: During opening, the two spring pins may be remained in the right housing. If the rear
housing set need replacing, take down the pins and assemble them to the new housing.
12
Description
Part Number
Qty.
Tapping Screw
5610032004
11
Spring Pin
5670011001
2
Rear Housing Set
2824291001
1
Replace the Motor
Rear housing set
Spring Pin