EasyManuals Logo

EGO ST1520S User Manual

Default Icon
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER—ST1520 & ST1520S14
UNFOLDING THE SHAFT (ONLY FOR ST1520S)
WARNING:
In order to avoid pinching your hands or ngers, do not hold the
shaft at the joint.
WARNING:
Do not attempt to start the trimmer until the shaft has been locked.
1. Remove the battery pack from the
trimmer.
2. Put your trimmer on the ground or
the oor and make sure that the
cable is inside the shaft, so that it
will not be pinched when closing
the joints. Carefully unfold the shaft
until the two holes in the joint are
accurately aligned (Fig. 2).
3. Insert the bolt (supplied) and tighten
it with the supplied hex wrench to
lock the shaft in place (Fig. 3).
2
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EGO ST1520S and is the answer not in the manual?

EGO ST1520S Specifications

General IconGeneral
Cutting Swath15 inches
Line Diameter0.095 inches
Feed TypeBump Feed
Battery Voltage56V
Motor TypeBrushless
Power SourceBattery
Adjustable HandleYes
Warranty5 years
Line FeedBump

Related product manuals