EGO STA1500 Repair Guide Line

Troubleshooting
3
Problem
Possible Cause
Fault Position
Test & Solution
Not feeding line
Poor cutting line
Trimmer line
Replace the cutting line. (e.g. 2.4mm nylon
line)
Hard to wind up line
Support of the lower
housing assembly is worn
Lower housing
assembly
Replace the lower housing assembly
Not cutting the line
Blade on the guard assembly
is worn
Guard assembly
Replace the guard assembly

EGO STA1500 Specifications

General

Brand	EGO
Model	STA1500
Category	Trimmer
Language	English