SSR Operating Instructions
3/10
Vers. 2.4 © ehb errors excepted
General Information
1.1 Target Group
This documentation is intended for technical service personnel.
1.2 Important Information for Use
Use
The device may only be operated with the accessories supplied.
Clean the device with mild cleaning agents only.
Do not insert any objects which were not designed for this specific purpose into the
openings of the device, as this may lead to faults in the electronics.
When operating the device, always observe the general
accident prevention regulations.
Safety Do not operate the SSR within range of strong electromagnetic fields.
Please observe the temperature specifications!
Storage When not in use, the SSR device may only be stored according to the operating
specifications.
Installation
During the installation of the device follow the directions of the manufacturers of
plugs and wire harnesses.
Shipping
The device may only be shipped in its original packaging or in equally sturdy
packaging.
Use of unsuitable packaging constitutes negligence, whereby any repair under
warranty is forfeited.
Maintenance
The SSR requires no maintenance throughout its entire service life and requires
no special care.
Opening the
SSR
The SSR contains no parts that can be maintained, replaced or repaired by the
customer or anyone other than authorised ehb maintenance staff.
1.3 Device Repair
Should a repair be necessary, please send the device to:
ehb electronics gmbh
Hans-Böckler-Str. 20
30851 Langenhagen, Germany
Please ensure that you enclose a written description of the fault(s). This will make it much easier for
the ehb electronics gmbh service department to find the error and return the SSR to you quickly.
Alternatively, use our online service for returning the device: www.ehbservice.de
To Next Page
Loading...
Need help?
General