6
This Smoke Alarm is designed for more difficult areas, as you
can silence the alarm for 8 minutes. This gives time for smoke
or fumes to clear, (see page 8 for more details).
4. Installing your Smoke Alarm
(a) Attaching to Ceiling or Wall
(NB details of how to interconnect the Smoke Alarm Ei100TYC
are given on page 7).
The Smoke Alarm is battery operated and needs no wiring,
(except when interconnecting). Use figure 6 below, as a help in
mounting.
1. Pull Cover open at Tab (2). Remove Cover from Base by
separating at rear Snap-in Hinges (5).
2. Place the Base on ceiling or wall exactly where you want to
mount the unit. With a pencil, mark the location of the Screw
Holes (6).
3. Taking care to avoid any electrical wiring in the ceiling or wall,
To Next Page
Loading...
