To Next PageTo Next Page
Need help?Do you have a question about the Ei Electronics Ei141RC - Ionisation and is the answer not in the manual?
General| Sensor Type | Ionisation |
|---|---|
| Power Supply | Mains powered |
| Battery Backup | Yes |
| Alarm Sound Level | 85 dB at 3 meters |
| Test Button | Yes |
| LED Indicator | Yes |
| Operating Temperature | 0°C to 40°C |
| Warranty | 5 years |
| Type | Ionisation |
| Standards Compliance | EN 14604 |
Check indicator lights, test button function, and clean vents for normal operation and maintenance.
Procedure for weekly inspection and testing of alarm functions, including indicator lights and connectivity.
Diagnosing and resolving issues when the alarm unit emits beeping sounds, covering battery and cell issues.
How to use the test/silence button to temporarily quiet alarms and manage reduced sensitivity.
Steps to identify and reduce frequent nuisance or false alarms caused by environment or contamination.
Troubleshooting steps when the alarm sounds without any obvious cause like smoke or heat.
Diagnosing and resolving low battery warnings and other intermittent beeping issues for different models.
Steps to ensure all interconnected alarms sound when one is triggered, checking signal transmission and connections.
