EasyManuals Logo

Ei Electronics Ei141RC - Ionisation User Manual

Ei Electronics Ei141RC - Ionisation
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Do not paint your alarm. Do not allow
paint, water or dust to contaminate your
alarm.
Your alarm is a mains 230V AC
electrical appliance. Do not open or
insert an
y
thin
g
into the alarm.
3. IMPORTANT INFORMATION
Regularly check that the green mains
indicator light on the cover is lit.
If alarm beeps once every 40 seconds for
over 20 minutes, the battery is probably
depleted (models Ei141RC/144RC/146RC
only) and must be replaced.
(see "CHANGING THE BATTERY" section).
Test weekly - press and hold the test
button on the alarm for 10 seconds. The
alarm will sound loudly and the red light
on the cover should flash rapidly. All the
other interconnected alarms should sound.
If a nuisance alarm occurs, press the
test/hush button to silence the alarm for
10 minutes.
Clean your alarm regularly. This will
reduce the risk of false alarms.
Remove or completely cover your alarm
when decorating to prevent dust or other
contamination dama
in
the unit.
If your alarm sounds for no reason and
will not reset, it can be removed by
releasing the clip on the base.
(see "ALARM REMOVAL" section).
www.acornfiresecurity.com
www.acornfiresecurity.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ei Electronics Ei141RC - Ionisation and is the answer not in the manual?

Ei Electronics Ei141RC - Ionisation Specifications

General IconGeneral
BrandEi Electronics
ModelEi141RC - Ionisation
CategorySmoke Alarm
LanguageEnglish

Related product manuals