To Next PageTo Next Page
Need help?Do you have a question about the Ei Electronics Ei144RC - Heat and is the answer not in the manual?
General| Type | Heat Alarm |
|---|---|
| Sensor Type | Thermistor |
| Alarm Temperature | 58°C (136°F) |
| Test Button | Yes |
| LED Indicator | Yes (Red) |
| Operating Temperature | 0°C to 40°C |
| Standards Compliance | BS 5446-2:2003 |
| Warranty | 5 years |
| Hush Mode | Yes |
| Alarm Volume | 85dB at 3 meters |
| Interconnectability | Up to 12 alarms |
| Power Supply | 230V AC Mains with 9V Alkaline Battery Backup |
Procedure for inspecting and testing alarms, including indicator lights and test button functionality.
Guidance on managing alarms when mains power is off for extended durations to prevent battery depletion.
Steps to identify the cause of beeping sounds from the alarm unit and required actions.
Description of the Test/Silence button functionality for managing nuisance or false alarms.
Details on circumstances where smoke/heat alarms may be ineffective and potential causes.
Guidance on preventing frequent nuisance or false alarms from the smoke/heat alarm.
Steps to identify and resolve alarms sounding without apparent cause, including interconnected units.
Troubleshooting low battery indications and other intermittent beeps for specific alarm models.
Diagnosing issues when interconnected alarms fail to sound together or transmit signals.
