EasyManua.ls Logo

Ei Electronics Ei208 Series - 7. Maintenance Guidelines

Ei Electronics Ei208 Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(4) Get medical help immediately for anyone suffering the effects of Carbon
Monoxide poisoning (headache, nausea), and advise that Carbon Monoxide
poisoning is suspected.
(5) Ring your gas or other fuel supplier on their emergency number. Keep the
number in a prominent place.
(6) Do not re-enter the property until the alarm has stopped. (If the alarm has
been silenced by pressing the test/hush button, wait at least 5 minutes so the
Alarm can check that the CO has cleared).
(7) Do not use the fuel appliances again until they have been checked by a
registered installer or equivalent expert.
7. Maintenance
Clean the outside case by occasionally wiping with a clean damp cloth. Do not
use any cleaning agents, bleaches, detergents or polishes, including those in
aerosol cans. Avoid spraying air fresheners, hair spray, paint or other aerosols
near the CO Alarm. Do not place air fresheners near the unit.
Use the narrow nozzle of a vacuum cleaner to remove fluff and other
contamination from the cover slots and gas entry holes.
Caution: Do not paint the CO Alarm.
Remove the CO Alarm when decorating. Do not allow water or dust to
contaminate the Alarm.
Warning: Do not open or tamper with the CO Alarm. There are no user
serviceable parts inside and this can damage the Alarm.
20
Maintenance

Related product manuals