15. INDICATOR SUMMARY
MODE
1.1. Standby Mains On ON
1 flash/40 sec
1.2. Mains Off
2.1. Sensing Fire itself
3. Low Power Back-up Cells
(beep and red flash simultaneous)
4. Hush mode after Test/Hush Button pressed.
Auto resets after 10 minutes
6. Replace Unit
excessively contaminated
7. Either Sensor Defective
(beep and amber flash simultaneous)
8. Pressing the Test button or Remote Testing
(with Ei1529RC or RadioLINK Ei411H)
5. Memory – after fire sensed
(Resets after 24 hours or button test)
Horn “chirps rapidly” on first button test
2.2. External Fire Signal
(on Interconnect or RadioLink)
GREEN
LIGHT
RED
LIGHT
AMBER
LIGHT
HORN
BEEP
HORN
ALARM
ON
2 flashes/sec
ON
ON
1 flash/40 sec 1 beep/40 sec
1 beep/40
sec
OFF
1 flash/40 sec
1 flash/8
sec
2 flashes
1 sec apart
every 40 sec
2
flashes/sec
1 flash/40
sec
1 flash/40
sec
B16351-R0-Ei2100 SERIES-USE.qxd 18/9/08 3:47 PM Page 21
To Next Page
Loading...
