3. IMPORTANT INFORMATION
Do not paint your alarm. Do not allow paint, water or dust
to contaminate your alarm.
Your alarm is a mains 230V AC electrical appliance. Do not
open or insert anything into the alarm.
Regularly check that the green mains indicator light on the
cover is on.
If the alarm beeps and the red light flashes at the same
time the battery is depleted – ensure green mains power
light is on.
Test weekly - press and hold the Test/Hush button on the
alarm for 10 seconds. The alarm will sound loudly and the
red light on the cover should flash rapidly. All the other
interconnected alarms should sound.
B16351-R0-Ei2100 SERIES-USE.qxd 18/9/08 3:47 PM Page 5
To Next Page
Loading...
