31
The Ei3000MRF modules (if required) must be re-fitted to the Alarms and the Alarms must be
re-attached to the mounting plates when the premises are re-occupied. Ensure to match the original
RF module back to the same Alarm head.
(Long term storage (over 1 year) can damage the batteries such that they will not recharge when the
units are re-connected to the mains supply).
WARNING: DO NOT TEST WITH FLAME
This can set fire to the Alarm and damage the house. We also do not recommend testing with heat
as the results can be misleading unless special apparatus is used.
3.2 Cleaning your Alarm
Clean your Alarm regularly. In dusty areas it may be necessary to clean the Alarm more frequently.
Use the narrow nozzle attachment of your vacuum cleaner to remove dust, insects and cobwebs from
the sides and cover slots where the airflow enters. Clean the outside cover by occasionally wiping
with a clean damp cloth then dry thoroughly with a lint free cloth. Do not use any cleaning agents,
bleaches, detergents or polishes, including those in aerosol cans.
Vacuum
Vacuum around the side vents to clean
Wipe
Clean the Alarm with a clean damp cloth
and dry thoroughly
To Next Page
Loading...