9
3.4 ENGINE TECHNICAL SPECIFICATIONS:
Parameters Unit
Details
40 Kva 50 Kva 62.5 Kva
Engine Manufacturer Name VE Commercial Vehicles Ltd
Engine Make Make EICHER
Engine Model Model EE483TC EE483TC EE483TCI
Emission Compliance Standard CPCB1 – As Per GSR 448 (E) 12.07.2004
No of Cylinders Nos. 4
Engine Configuration Configuration Inline / 4 Stroke
Engine Aspiration Type Turbo Charged
Turbo Charged
Inter cooled
Engine Fuel Type High Speed Diesel
Combustion Chamber Type Type Direct injection
Cylinder Bore X Stroke Mm 100 X 105
Engine Displacement Litres 3.3
Compression ratio Ratio 17:1 ± 0.5 mm
Engine Rated Output Kw ( HP) @ RPM
38 (52) @
1500
48 (65) @
1500 RPM
59 (80) @ 1500
Standard Operating
Conditions
Ambient /
Relative Humidity
/ Altitude
25°C / 40 % / 1000 mbar
Engine Deration Applicability Above 4000 feet
Rating Standard Standard IS10000
Overload Permissibility
10 % over load Permissible for 1 Hour in Every
12 Hours of Operation
Governing Standard Standard BS5514 / IS 10000
Governing Class Class A 1
Engine Low Idling Speed RPM 700 ± 50
Engine Fly Up Speed RPM 1560 ± 10
Engine Firing order Sequence 1-3-4-2
Direction of Rotation Direction Anti Clock wise when viewed from Flywheel End
Flywheel Standard SAE J 620 SAE 10 SAE 11.5
Flywheel Housing Standard SAE J 620 SAE 3 SAE 2
Lubrication Method Method Oil Pump Forced feed system
Oil Pump Type Gear Type
Oil Filter-Main Type / Nos. Paper Type / Single
Oil Filter-By Pass Type Spin on Type Paper
Oil Cooler Type Shell Type
Engine Lubricating Oil
Specification /
Grade /
Recommendation
To Next Page
Loading...
Need help?
General
