1.Signal to Engine Control Unit /
Stop Relay for Stopping the
engine in the event of Low
Lubricating Oil Pressure
2. NC-Normally Closed
1.Signal to Engine Control Unit /
Stop Relay for Stopping the
Engine in the event of Air Cleaner
Element Clogging leading to High
Intake air restriction
2.NO-Normally Open
7
Engine Stop
Solenoid
12V
Engine Normal stopping through
Key Switch/ Stops the engine
based on the command received
from Stop relay in the event of
Low Lubricating Oil Pressure, High
Coolant Temperature and High Air
restriction
Proper earthing, recommended Voltage, proper Crimping of wiring connections and avoiding loose
connection is mandatory for satisfactory performance of electrical system.
The basic engine is supplied with the above features for integration to Engine control unit / Instrumentation.
The Equipment manufacturers are requested to refer engine manufacturer for necessary details.
To Next Page
Loading...
Need help?
General
