To Next PageTo Next PageWhy does EIJKELKAMP Aquameter turn on and off immediately?
If the Aquameter turns on but turns off again almost immediately, the batteries are probably nearly dead or incorrectly fitted. Check you have fresh batteries fitted and that they are inserted the correct way round.
Why won't my EIJKELKAMP Aquameter turn on?
If the Aquameter will not turn on when the on/off key is pressed, the batteries are probably dead or incorrectly fitted. Check you have fresh batteries fitted and that they are inserted the correct way round.
What to do for battery leakage in EIJKELKAMP Measuring Instruments?
Remove and discard the batteries immediately. Thoroughly clean the battery compartment and terminals. If the battery terminals are corroded, contact our Service Department for return instructions.
General| Brand | EIJKELKAMP |
|---|---|
| Model | Aquameter Series |
| Category | Measuring Instruments |
| Language | English |
Explains the various parameter readings displayed by the meter.
Step-by-step guide to performing RapidCal calibration.
Lists and explains common calibration errors and solutions.
Detailed procedure for calibrating the pH electrode.
Step-by-step guide for DO zero point calibration.
Detailed procedure for calibrating Electrical Conductivity.
Step-by-step guide for zero point turbidity calibration.
Procedure for calibrating at the 1000 NTU point.
Procedure to transfer logged data from meter to PC.
