Bitte beachten Sie, dass unsere Geräte
bestimmungsgemäß nicht für den gewerblichen,
handwerklichen oder industriellen Einsatz konstruiert
wurden. Wir übernehmen keine Gewährleistung,
wenn das Gerät in Gewerbe-, Handwerks- oder
Industriebetrieben sowie bei gleichzusetzenden
Tätigkeiten eingesetzt wird.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order to
ensure that the lawn mower is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servicing
conditions.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind.
4. Technical data
BG-PM 40 P
Engine type:
Single cylinder four-stroke engine, 118 ccm
Engine power: 2.6 kW/3,5 HP
Working speed: 2800 min
-1
Fuel: standard petrol
Tank capacity: approx. 1.3 l
Engine oil: approx. 0.4 l / 15W40
Spark plug: FG RTC
Electrode spacing: 0.6 mm
Cutting height adjustment: dezentral, (32/46/62 mm)
Cutting width: 400 mm
L
pA
sound pressure level: 75 dB(A)
L
WA
sound power level: 96 dB(A)
Vibration a
hw
5.73 m/s
2
Weight: 24 kg
BG-PM 46 P
Engine type:
Single cylinder four-stroke engine, 135 ccm
Engine power: 2.75 kW/3,75 HP
Working speed: 2800 min
-1
Fuel: standard petrol
Tank capacity: approx. 1.3 l
Engine oil: approx. 0.6 l / 15W40
Spark plug: FG RTC
Electrode spacing: 0.6 mm
Cutting height adjustment: dezentral, (32/46/62 mm)
Cutting width: 460 mm
L
pA
sound pressure level: 86 dB(A)
L
WA
sound power level: 96 dB(A)
Vibration a
hw
3.57 m/s
2
Weight: 25,7 kg
5. Before starting the equipment
5.1 Assembling the components
Some parts of the mower come disassembled. For
quick and easy assembly, read and follow the
instructions below.
Important! You will need the following additional
tools (not supplied) for assembly, and also for
maintenance work:
앬 An open-ended wrench (10 mm)
앬 A ring wrench (17 mm)
앬 A ratchet, extension, size 13 socket
앬 An open-ended wrench (13 mm)
앬 A flat oil drip tray (for changing the oil)
앬 A 1 liter measuring jug (oil/petrol resistant)
앬 A petrol can (5 liters is sufficient for approx. 6
operating hours)
앬 A funnel (suitable for the tankʼs petrol filler neck)
앬 Household wipes (to wipe up oil/petrol residue;
dispose of these at a filling station)
앬 A petrol suction pump (plastic, available from DIY
stores)
앬 An oil can with hand pump (available from DIY
stores)
앬 1 liter of engine oil (15W-40)
Assembling the lawn mower
1. Take the mower and attachment parts out of the
packaging and check that all parts are present
(Fig. 2-3).
2. Fasten the lower push bar to the mounts on the
mower housing (Fig. 4-5).
24
GB
To Next Page
Loading...
Need help?
General
