Why EINHELL GC-PM 40 Lawn Mower engine does not start?
If your EINHELL Lawn Mower engine doesn't start, try these steps: * Ensure the engine start/stop lever is pressed. * Check the throttle lever position (if your model has one). * Replace the spark plug if it's defective. * Refuel if the fuel tank is empty. * Actuate the fuel pump (primer) if your model has one.
What to do if EINHELL Lawn Mower leaves lawn yellow, uneven cut?
If your EINHELL Lawn Mower isn't cutting evenly and the lawn turns yellow, it could be due to a few reasons. The blade might not be sharp enough, so try sharpening it. Also, the cutting height might be too low; adjust it to a more appropriate level. Lastly, ensure the engine speed isn't too low by setting the throttle lever to max (if your lawnmower has one).
Why EINHELL Lawn Mower engine does not run smoothly?
If the engine of your EINHELL Lawn Mower isn't running smoothly, the air filter might be dirty, so try cleaning it. Another potential cause is a dirty spark plug, which should also be cleaned.
What to do if EINHELL GC-PM 40 grass chute is not clean?
If the grass chute of your EINHELL Lawn Mower isn't clean, it could be because the engine speed is too low. Try setting the throttle lever to maximum. It might also be that the cutting height is too small, so set it properly. A worn blade can also cause this issue, so replace the blade if necessary. Finally, check if the grass bag is clogged and empty it if it is.
How to fix EINHELL GC-PM 40 that vibrates intensively?
If your EINHELL Lawn Mower doesn't operate smoothly and vibrates intensively, check if any bolts are loose and tighten them. Also, make sure the blade attachment is secure. If the blade is imbalanced, consider replacing it.
Ensures the engine start/stop lever functions correctly for safe operation and quick shutdown.
Provides step-by-step instructions for starting the petrol engine, including primer use.
Details checking and changing engine oil, and air filter maintenance for optimal engine performance.
Covers blade sharpening, replacement, damaged blade handling, and spark plug maintenance.
General| Cutting width | 400 mm |
|---|---|
| Product color | Black, Red |
| Cutting system | Cylinder blades |
| Ergonomic handle | Yes |
| Housing material | Plastic |
| Number of wheels | 4 wheel(s) |
| Rotational speed | 2900 RPM |
| Maximum lawn area | 800 m² |
| Mulching function | - |
| Fuel tank capacity | 1 L |
| Handle(s) features | Ergonomic, Foldable |
| Engine displacement | 99 cm³ |
| Front wheels diameter | 152 mm |
| Minimum cutting height | - mm |
| Grass collecting volume | 45 L |
| Power source | Gasoline |
Weight and Dimensions| Depth | 705 mm |
|---|---|
| Width | 465 mm |
| Height | 410 mm |
| Weight | 18500 g |
| Package weight | 21500 g |
To Next Page