Why EINHELL Lawn Mower engine does not start?
If your EINHELL Lawn Mower engine doesn't start, try these steps: * Ensure the engine start/stop lever is pressed. * Check the throttle lever position (if your model has one). * Replace the spark plug if it's defective. * Refuel if the fuel tank is empty. * Actuate the fuel pump (primer) if your model has one.
What to do if EINHELL GC-PM 46 S leaves lawn yellow, uneven cut?
If your EINHELL Lawn Mower isn't cutting evenly and the lawn turns yellow, it could be due to a few reasons. The blade might not be sharp enough, so try sharpening it. Also, the cutting height might be too low; adjust it to a more appropriate level. Lastly, ensure the engine speed isn't too low by setting the throttle lever to max (if your lawnmower has one).
Why EINHELL Lawn Mower engine does not run smoothly?
If the engine of your EINHELL Lawn Mower isn't running smoothly, the air filter might be dirty, so try cleaning it. Another potential cause is a dirty spark plug, which should also be cleaned.
What to do if EINHELL GC-PM 46 S grass chute is not clean?
If the grass chute of your EINHELL Lawn Mower isn't clean, it could be because the engine speed is too low. Try setting the throttle lever to maximum. It might also be that the cutting height is too small, so set it properly. A worn blade can also cause this issue, so replace the blade if necessary. Finally, check if the grass bag is clogged and empty it if it is.
How to fix EINHELL Lawn Mower that vibrates intensively?
If your EINHELL Lawn Mower doesn't operate smoothly and vibrates intensively, check if any bolts are loose and tighten them. Also, make sure the blade attachment is secure. If the blade is imbalanced, consider replacing it.
Explains symbols and warnings used throughout the manual for safe operation.
Identifies all parts of the lawn mower with corresponding numbers for easy reference.
Lists all components included in the product package for user verification.
Provides noise level and vibration emission values for user awareness and safety.
Step-by-step guide for assembling the lawn mower parts before initial use.
Instructions on how to set the desired cutting height for the lawn mower.
Procedures for starting the lawn mower engine safely and correctly.
Guidance on effective mowing techniques for optimal results and lawn health.
Instructions on how to safely stop the lawn mower engine.
Steps for safely removing and emptying the grass collection bag.
Procedures for cleaning the lawn mower after use.
Details on routine checks and upkeep for the lawn mower.
General| Type | Push lawn mower |
|---|---|
| Cooling type | Air |
| Cutting width | 460 mm |
| Product color | Black, Red |
| Uncertainty K | 1.5 m/s² |
| Housing material | Steel |
| Number of wheels | 4 wheel(s) |
| Rotational speed | 3000 RPM |
| Maximum lawn area | - m² |
| Sound power level | 96 dB |
| Fuel tank capacity | 1.3 L |
| Handle(s) features | Adjustable, Ergonomic, Foldable |
| Vibration emission | 6.49 m/s² |
| Engine displacement | 139 cm³ |
| Rear wheels diameter | 204 mm |
| Sound pressure level | 80.7 dB |
| Front wheels diameter | 177.8 mm |
| Recommended lawn area | 1400 m² |
| Maximum cutting height | 80 mm |
| Minimum cutting height | 30 mm |
| Grass collecting volume | 50 L |
| Engine number of strokes | 4 |
| Number of height positions | 9 |
| Cutting clearance adjustment | Yes |
| Power source | Gasoline |
Weight and Dimensions| Weight | 31500 g |
|---|---|
| Package depth | 530 mm |
| Package width | 770 mm |
| Package height | 430 mm |
| Package weight | 34000 g |
To Next Page