Why won't my EINHELL GC-PM 46/4 S Lawn Mower engine start?
If the EINHELL Lawn Mower engine won't start, make sure the engine start/stop lever is pressed. Also, check the throttle lever position (if your model has one) and replace the spark plug if it's defective. Ensure the fuel tank isn't empty and actuate the fuel pump (primer) if your model has one.
How to fix yellow and uneven cut with EINHELL GC-PM 46/4 S Lawn Mower?
If your EINHELL Lawn Mower is leaving a yellowed, uneven cut, the blade may not be sharp enough, so sharpen it. Also, the cutting height might be too low, adjust it to the proper height. If your lawnmower has a throttle lever, ensure the engine speed isn't too low by setting it to max.
What to do if EINHELL Lawn Mower vibrates intensively?
If your EINHELL Lawn Mower isn't operating smoothly and vibrates intensively, check the bolts to make sure they are not loose. Also, check the blade attachment and replace the blade if it is imbalanced.
How to fix EINHELL Lawn Mower engine that does not run smoothly?
If the EINHELL Lawn Mower engine isn't running smoothly, the air filter or the spark plug might be dirty. Clean the air filter and the spark plug.
Why is grass chute not clean on my EINHELL GC-PM 46/4 S Lawn Mower?
If the grass chute of your EINHELL Lawn Mower isn't clean, set the throttle lever to max (if available), ensure the cutting height is properly set, replace the blade if it's worn, and empty the grass bag if it's clogged.
Instructions for cleaning the mower and general upkeep.
Specific maintenance for the petrol engine, oil change, and blade management.
General| Engine Type | 4-stroke |
|---|---|
| Engine Power | 1.6 kW |
| Engine Displacement | 139 cm³ |
| Cutting Width | 46 cm |
| Cutting Height Adjustment | Central |
| Cutting Height Range | 25-75 mm |
| Weight | 30 kg |
| Wheel Drive | Yes |
| Wheel Size | 200 mm |
To Next Page