EINHELL CC-PO 1100/1 E User Manual

CC-PO 1100/1 E
8
BR Manual de instruções original
Politriz e lixadeira
E Manual de instrucciones original
Lijadora y pulidora
GB Original operating instructions
Polishing and sanding machine
South America
Atenção!
Este manual de instruções foi criado para ambas às versões do aparelho: 127 V e 220 V.
Atenção!
O aparelho, no entanto foi desenvolvido somente para uma única voltagem: ou 127 V, ou 220 V.
Assim, verifi que a voltagem do mesmo antes de conectá-lo à tomada de energia elétrica.
Anl_SA_CC_PO_1100_1_E_SPK8.indb 1Anl_SA_CC_PO_1100_1_E_SPK8.indb 1 29.04.2020 07:04:2229.04.2020 07:04:22

EINHELL CC-PO 1100/1 E Specifications

General

Power	1100 W
Sanding plate size	225 x 225 mm
Weight	2.1 kg
Polishing pad diameter	180 mm
Polishing disc diameter	180 mm
Cable length	2 m
No-load speed	12000 min^-1
Orbital stroke rate	24000 min^-1

Summary

1. Safety regulations

1. Workplace safety

Ensures a clean, well-lit work area to prevent accidents.

2. Electrical safety

Proper plug use and avoiding water/moisture to prevent electric shock.

3. Safety of persons

Focus on safe operation, avoiding distractions, and wearing PPE.

2. Layout and items supplied

2.1 Layout (Fig. 1)

Diagram illustrating the components and parts of the polishing and sanding machine.

2.2 Items supplied

List of all components included in the package with the machine.

3. Proper use

Improper use

Lists applications contrary to intended use and prohibited uses.

4. Technical data

Sound and vibration

Details sound and vibration values measured according to EN 60745 standards.

Residual risks

Lists potential residual risks like lung damage, hearing damage, and hand-arm vibration.

5. Before starting the equipment

Assembly (Fig. 4-6)

Instructions for assembling the equipment, emphasizing unplugging the power.

6. Operation

Switching the equipment ON/OFF

Details how to turn the equipment on and off using the switch and speed control.

Using as a polishing machine

Instructions for polishing, including using agents and speed settings.

Using as a sanding machine

Guidelines for using the machine for sanding with various attachments.

Speed Control Display (Fig. 3)

Explains how to use the speed control buttons and read the display.

7. Replacing the power cable

8. Cleaning, maintenance and ordering of spare parts

Cleaning

Instructions for cleaning the equipment, emphasizing safety and proper methods.

Carbon brushes

Guidance on checking carbon brushes by qualified personnel due to sparking.

8.3 Maintenance

8.4 Ordering replacement parts

9. Disposal and recycling

10. Storage

11. Service information