EasyManua.ls Logo

EINHELL FW 500 - Page 9

EINHELL FW 500
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
GB
9. Fault
The appliance does not heat Household fuse has triggered Check the household fuse; make
sure that no other high-power
devices are loading the fuse in
addition
Plug is not connected Connect the plug
Room temperature is higher than
the temperature set on the
appliance
Set the thermostat control higher
The overheating cutout has
responded
Do not cover the appliance –
maintain the minimum distances!
If the appliance still fails to work after you have checked the above points, please contact your customer
service center (in Germany ISC GmbH).
Anleitung FW 500_SPK1 10.05.2006 9:05 Uhr Seite 9

Related product manuals