EINHELL GC-EL 3000 E - Troubleshooting Guide

EN
- 13 -
11. Troubleshooting guide
Problem Possible cause Solution
Motor does not
start.
- No voltage present.
- Power cord defective.
- Motor terminals disconnected.
- Equipment not assembled correctly.
- Check the cord and fuses.
- Have the unit checked by a service
center.
- Have the unit checked by a service
center.
- Make sure that it is assembled
correctly.
Anl_GC_EL_3000_E_SPK7_USA.indb 13Anl_GC_EL_3000_E_SPK7_USA.indb 13 16.12.2022 08:30:3016.12.2022 08:30:30