EINHELL GC-EM 1030/1 - User Manual

EINHELL GC-EM 1030/1

100 pages

To Next Page

To Next Page

Loading...

GC-EM 1030/1

Art.-Nr.: 34.002.40 I.-Nr.: 11056

1

D Originalbetriebsanleitung

Elektro-Rasenmäher

GB Original operating instructions

Electric Lawn Mower

F Mode d’emploi d’origine

Tondeuse à gazon électrique

I Istruzioni per l’uso originali

Tosaerba elettrico

DK/ Original betjeningsvejledning

N El-dreven græsslåmaskine

S Original-bruksanvisning

Elgräsklippare

HR/ Originalne upute za uporabu

BIH Električna kosilica za travu

RS Originalna uputstva za upotrebu

Električna kosilica

Anl_GC_EM_1030_1_SPK1.indb 1Anl_GC_EM_1030_1_SPK1.indb 1 20.09.2016 15:26:4920.09.2016 15:26:49

Table of Contents

Questions and Answers:

J
Jason WheelerJul 28, 2025
Why won't my EINHELL GC-EM 1030/1 start?
- J
  johnsonpatrickJul 29, 2025
  If the EINHELL Lawn Mower motor won't start, several factors could be at play. First, ensure there's electricity at the plug by checking the cable and fuse. If the mower is in high grass, try starting it in a low-grass area or adjust the cutting height. Also, a clogged mower housing can prevent the blade from moving freely, so clean it thoroughly. Other potential causes include a defective capacitor, cable, or combined switch/plug, or separated connectors and in these cases you should have it repaired by the Customer Service Center.
S
Stephen OwensAug 8, 2025
Why is my EINHELL GC-EM 1030/1 Lawn Mower losing power?
- D
  davidbrightAug 8, 2025
  If your EINHELL Lawn Mower's motor performance is declining, it might be due to several reasons. If the grass is too high or damp, correct the cutting height. Another cause could be a clogged mower housing, so ensure you clean it. Lastly, a severely worn blade will impact performance, so consider replacing it.
J
Jordan MillerAug 16, 2025
What to do if EINHELL GC-EM 1030/1 Lawn Mower cutting is irregular?
- H
  hgrantAug 16, 2025
  If your EINHELL Lawn Mower is cutting irregularly, the blade may be worn, so replace or resharpen it. Also, check and correct the cutting height, as the wrong height can cause uneven cutting.

EINHELL GC-EM 1030/1 Specifications

General

Power	1000 W
Cutting Width	30 cm
Grass Box Capacity	25 L
Wheel Diameter Front	140 mm
Wheel Diameter Rear	140 mm

Summary

Safety and Warning Information

Explanation of Warning Signs

Explains the meaning of various warning symbols displayed on the equipment for user safety.

Product Identification and Contents

Lawn Mower Component Layout

Details the layout of the lawn mower's parts and identifies each component by number.

Included Items in Delivery

Lists all parts supplied with the lawn mower upon purchase.

Intended Use and Safety Precautions

Proper Use and Limitations

Defines the lawn mower's intended private use and specifies prohibited applications.

Technical Data

Provides key technical data such as voltage, power, cutting width, and sound levels.

Residual Risks and Precautions

Outlines potential residual risks and necessary protective measures for safe operation.

Equipment Setup and Preparation

Handlebar Assembly

Step-by-step guide for assembling the upper and lower push bars to the mower.

Grass Box Installation

Instructions on how to assemble and attach the grass collection box to the mower.

Wheel Fitting

Guides the user on how to attach and secure the wheels to the lawn mower.

Adjusting Cutting Heights

Details the procedure for setting the desired cutting height for the lawn.

Power Supply Requirements

Specifies the necessary power supply conditions and safety measures for connection.

Power Cable Guidance

Provides essential information and warnings regarding the use and condition of the power cable.

Operating the Lawn Mower

Correct Mowing Techniques

Offers advice on correct mowing practices for optimal results and lawn health.

Power Cable Replacement

Maintenance, Cleaning, and Parts

Cleaning the Lawn Mower

Instructions for cleaning the lawn mower to maintain its performance and appearance.

Carbon Brush Inspection

Guidance on checking and replacing carbon brushes, recommending professional service.

Routine Maintenance Tasks

Covers routine maintenance tasks like checking blades, bolts, and grass assembly.

Blade Replacement

Ordering Spare Parts

Disposal and Recycling

Equipment Storage

Troubleshooting Common Issues

Motor Fails to Start

Lists possible causes and remedies for the motor not starting.

Reduced Motor Performance

Identifies reasons for decreased motor power and suggests solutions.

Irregular Cutting Issues

Explains why cutting might be uneven and how to fix it.

Service and Support

Wear Parts and Consumables

Lists parts subject to normal wear and tear and consumables.

Missing Parts Information

Information regarding missing parts from the delivery scope.

Warranty Certificate Details

Warranty Terms and Claims

Details the conditions, duration, and procedure for making warranty claims.

Related product manuals

Preview: EINHELL GC-EM 1030

EINHELL GC-EM 1030

Preview: EINHELL GC-EM 1032

EINHELL GC-EM 1032

EINHELL GC-EM 1742

Preview: EINHELL GC-EM 1536

EINHELL GC-EM 1536

EINHELL GC-PM 51/2 S HW-E

Preview: EINHELL GC-PM 46/2 S HW-E

EINHELL GC-PM 46/2 S HW-E

Preview: EINHELL GC-PM 51/3 S HW-E

EINHELL GC-PM 51/3 S HW-E

Preview: EINHELL GC-PM 46 SM HW-E Li

EINHELL GC-PM 46 SM HW-E Li

EINHELL GC-HM 40

Preview: EINHELL GC-PM 40

EINHELL GC-PM 40

Preview: EINHELL GC-PM 40/1

EINHELL GC-PM 40/1

EINHELL GC-PM 40/1 S