EINHELL GC-EM 1030 User Manual

GB
- 28 -
11. Troubleshooting
Fault Possible causes Remedies
The motor fails to
start
a) The capacitor is defective
b) There is no electricity at the plug
c) The cable is defective
d) The combined switch/plug is de-
fective
e) The connectors have become
separated from the motor or the
capacitor
f) The mower is standing in high
grass
g) The mower housing is clogged
a) The mower housing is clogged.
Have repaired by the Customer
Service Center
b) Check the cable and the fuse
c) Check the cable
d) Have repaired by the Customer
Service Center
e) Have repaired by the Customer
Service Center
f) Start in low grass or on an area that
has already been mowed; change
the cutting height if necessary
g) Clean the housing so that the blade
moves freely
The motor perfor-
mance drops
a) The grass is too high or too damp
b) The mower housing is clogged
c) The blade is severely worn
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
Cutting is irregular a) The blade is worn
b) Wrong cutting height
a) Replace or resharpen the blade
b) Correct the cutting height
Important! For protection, the motor is equipped with a thermal switch which cuts out when
the motor is overloaded and switches on again automatically after a short cooling period.
Anl_GC_EM_1030_SPK9.indb 28Anl_GC_EM_1030_SPK9.indb 28 27.11.2018 06:32:0327.11.2018 06:32:03

EINHELL GC-EM 1030 Specifications

General

Cutting width	300 mm
Grass catcher	Yes
Product color	Red
Cutting height	70 mm
Cutting system	Rotary blades
Number of wheels	4 wheel(s)
Rotational speed	3400 RPM
Front wheels diameter	140 mm
Recommended lawn area	300 m²
Minimum cutting height	30 mm
Grass collecting volume	25 L
Power source	AC
AC input voltage	220-240 V

Weight and Dimensions

Depth	590 mm
Width	380 mm
Height	285 mm
Weight	11220 g
Package weight	12860 g