How to troubleshoot motor not starting on EINHELL Lawn and Garden Equipment?
If the motor of your EINHELL Lawn and Garden Equipment does not start, begin by checking the line and fuse. If that doesn't resolve the issue, have the machine checked by a customer service center. It may also be necessary to adjust the working depth or clean the housing to ensure the roller can run freely.
What to do if EINHELL Lawn and Garden Equipment gives an imprecise scarifying result?
If you're getting an imprecise scarifying result with your EINHELL Lawn and Garden Equipment, try correcting the working depth. If the problem persists, consider replacing the roller.
Outlines essential safety rules to prevent injuries and damage during use.
Guides through the initial assembly steps, including push bar bracket fitting.
Step-by-step guide on how to start, operate, and stop the scarifier safely.
Emphasizes maintaining distance, proper footing, and scarifying on slopes.
Alerts users to the danger of the roller continuing to rotate after power off.
Addresses problems like the motor not starting or poor engine performance.
Solutions for imprecise scarifying results and the roller not rotating.
General| Power source | AC |
|---|---|
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Grass catcher | - |
| Product color | Black, Red |
| Working width | 310 mm |
| Housing material | Plastic |
| Number of knives | 8 |
| Working depth (max) | 9 mm |
| Rear wheels diameter | 100 mm |
| Front wheels diameter | 180 mm |
| Recommended lawn area | 300 m² |
| Adjustable working depth | Yes |
| Number of working depth positions | 3 |
Weight and Dimensions| Depth | 600 mm |
|---|---|
| Width | 460 mm |
| Height | 305 mm |
| Weight | 8220 g |
| Package depth | 480 mm |
| Package height | 300 mm |
| Package weight | 9890 g |
To Next Page