EasyManua.ls Logo

EINHELL GC-BC 25/1 I AS User Manual

EINHELL GC-BC 25/1 I AS
132 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GC-BC 25/1 I AS
Art.-Nr.: 34.019.57 I.-Nr.: 11019
9
D Originalbetriebsanleitung
Benzin-Motorsense
GB Original operating instructions
Petrol Power Scythe
F Instructions d’origine
Débroussailleuse à moteur à
essence
DK/ Original betjeningsvejledning
N Benzindrevet motorle
S Original-bruksanvisning
Bensindriven röjsåg
NL Originele handleiding
Benzinemotorzeis
E Manual de instrucciones original
Desbrozadora con motor
de gasolina
FIN Alkuperäiskäyttöohje
Bensiinikäyttöinen moottoriviikate
RO Instrucţiuni de utilizare originale
Motocoasă pe benzină
GR Πρωτότυπες Οδηγίες χρήσης
Bενζινοκίνητο θεριστήρι
Anl_GC_BC_25_1_I_AS_SPK9.indb 1Anl_GC_BC_25_1_I_AS_SPK9.indb 1 14.05.2019 13:45:5114.05.2019 13:45:51

Table of Contents

Questions and Answers:

EINHELL GC-BC 25/1 I AS Specifications

General IconGeneral
TypeString trimmer
Head type-
Handle typeU-type handle
Cutting width420 mm
Line diameter2 mm
Product colorBlack, Grey, Red
Rotational speed6600 RPM
Number of strokes2
Fuel tank capacity0.45 L
Brand compatibilityEinhell
Engine displacement25.4 cm³
Line length supplied4 m
Cutting diameter (max)230 mm
Power sourceGasoline
Weight and Dimensions IconWeight and Dimensions
Width280 mm
Length1180 mm
Weight6400 g
Package weight9000 g

Summary

Safety Regulations and Devices

Layout and Items Supplied

Product Layout Identification

Lists and identifies all components of the petrol power scythe as shown in figures 1 through 13.

Technical Data

Engine and Performance Specifications

Provides detailed technical specifications for the engine, power, displacement, and speed.

Assembly Instructions

Fitting the Steady Grip

Instructions for attaching the steady grip to the handle assembly.

Fitting the Long Handle

Guide on how to attach the long handle section of the equipment.

Fitting the Blade Guard Hood

Instructions for installing the protective guard for the cutting blade.

Fitting or Replacing the Cutting Blade

Step-by-step guide for installing or changing the cutting blade.

Fitting the Cutting Line Guard Hood

Instructions for attaching the cutting line guard hood to the main blade guard.

Fitting or Replacing the Line Spool

Guide on how to install or replace the line spool for trimming.

Before Starting the Equipment

Fuel and Oil Requirements

Information on the correct type of fuel and oil mixture for the engine.

Fuel Mixture Table

Table specifying petrol and 2-stroke oil ratios for mixing.

Operation

Starting the Engine When Cold

Detailed steps for starting the engine when it is cold.

Switching Off the Engine

Procedures for safely stopping the engine, including emergency stop.

Working with the Petrol Power Scythe

Preventing Recoil

Advice on avoiding dangerous recoil when cutting with the blade.

Maintenance Procedures

Troubleshooting Guide

Related product manuals