EasyManua.ls Logo

EINHELL GC-SC 36/31 Li - User Manual

EINHELL GC-SC 36/31 Li
54 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GC-SC 36/31 Li
Art.-Nr.: 3420663 I.-Nr.: 11019
7
EN Original operating instructions
Cordless Lawn Dethatcher + Scarifi er
SP Manual de instrucciones original
Escarifi cador/aireador inalámbrico
FR Traduction du mode d’emploi d’origine
Aérateur de gazon + scarifi cateur sans fi l
Anl_GC_SC_36_31_Li_USA_SPK7.indb 1Anl_GC_SC_36_31_Li_USA_SPK7.indb 1 28.01.2020 16:43:5928.01.2020 16:43:59

Table of Contents

Questions and Answers

  • J
    John RivasJul 28, 2025
    What to do if EINHELL GC-SC 36/31 Li Lawn and Garden Equipment motor does not start?
    • M
      Michelle MurphyJul 28, 2025
      If the motor does not start, several factors could be the cause. First, make sure the safety plug is correctly inserted. If it is not, insert the safety plug. Also, check that the battery is correctly inserted. If not, remove it and reinsert it. Another possible cause is that the scarifier housing is clogged. If this is the case, change the scarifier depth if necessary and clean the housing so that the cutting unit can rotate freely. If the internal terminals are disconnected or the safety lock-off is defective, contact customer service.
  • S
    singletonmelanieAug 4, 2025
    Why does my EINHELL Lawn and Garden Equipment motor performance drop?
    • S
      Shawn HallAug 4, 2025
      A drop in motor performance may be due to several reasons. The soil might be too hard; if so, correct the scarifier depth. Another reason could be that the scarifier housing is clogged; clean the housing in this case. Finally, the blade might be badly worn, and you would need to replace it.
  • G
    Grant SanchezAug 13, 2025
    What to do if EINHELL Lawn and Garden Equipment has an imprecise scarifying result?
    • R
      Robert FrankAug 13, 2025
      An imprecise scarifying result can occur if the blade is worn, in which case you should replace it. Also, check if the scarifier height is wrong and correct the scarifier depth if needed.
  • X
    xweaverAug 20, 2025
    What to do if EINHELL GC-SC 36/31 Li motor is running but the cutting unit is not rotating?
    • D
      Dale HernandezAug 20, 2025
      If the motor is running but the cutting unit isn't rotating, it's possible that the toothed belt is torn. Contact customer service.

Summary

Safety Information

General Appliance Safety

General safety precautions for electric gardening appliances, covering environment, children, dress, and personal protection.

Battery Safety

Safety guidelines for handling, charging, and storing battery packs to prevent fire, explosion, or injury.

Charger Safety

Important safety instructions for using the battery charger to avoid hazards like fire or chemical burns.

Scarifier Specific Safety

Safety measures specific to the scarifier, including checks for damage, sharp teeth, and handling on slopes.

Starting Up the Scarifier Safely

Preparations

Essential preparations before operation, including wearing protective gear like goggles and hearing protection.

Intended use

Before starting the equipment

Adjusting Scarifier Depth

Operation

Safety Precautions during Operation

Crucial safety warnings during operation, including using the safety switch, handling inclines, and avoiding contact with moving parts.

Battery Charging and Indicator

Information on charging Li battery packs and interpreting the battery capacity indicator LEDs for charge status.

Cleaning, maintenance and ordering spare parts

7.2 Cutting Unit Maintenance

7.3 Changing the Blade

Troubleshooting guide

EINHELL GC-SC 36/31 Li Specifications

General IconGeneral
Power SourceBattery
Battery Voltage36 V
Cutting Width31 cm
Working Width31 cm
Number of Blades1
Motor TypeBrushless
Wheel Diameter (Rear)150 mm

Related product manuals