EINHELL GC-KS 2540 CB User Manual

GB
- 8 -
maintenance work, adjustments, etc.
•
Never use the machine while other people
are nearby.
•
When inserting material take special care
to ensure that it does not contain any metal,
stones, bottles, cans or other foreign bodies.
•
Do not allow processed material to accumu-
late within the discharge area; this could pre-
vent the machine being able to discharge cor-
rectly and result in material recoiling through
the infeed opening.
•
When servicing the cutting tool, remember
that it may still be moving due to the starting
mechanism, even if the motor is not running
because of the cover interlock.
•
Children must not be permitted to use the
machine.
•
Wear ear protectors and safety goggles. Wear
these throughout the time the machine is in
operation.
•
Before starting the machine, check all screws,
nuts, bolts and other fastening materials to
ensure that they are secure and that all co-
vers and guards are in position. Damaged or
illegible labels must be replaced.
•
Connect the equipment to the power supply
only via an earth-leakage circuit breaker with
max. 30mA tripping current.
Explanation of the symbols used (see Fig. 11)
1. Important! Read the operating instructions
and follow the warnings and safety instruc-
tions
2. Switch off the machine and pull the power
plug before making adjustments, cleaning the
machine or if the cable is tangled or dama-
ged.
3. Important! Keep other persons and animals
away from the danger zone.
4. Important! Protect the machine from the
damp and never expose it to rain.
5. Important! Always wear safety goggles, ear
muff s, protective gloves and heavy-duty work
clothes!
6. Danger – rotating cutters. Keep your hands
and feet away from the openings when the
machine is running.
7. Wait until all parts of the machine have come
to a complete stop before touching them.
8. Protection class II; double-insulated
9. Noise emission complies with Directive
2000/14/EC!
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1 Loading funnel inlet
2 Loading funnel
3 Motor housing with cutter plate
4 Prodder
5 Chassis
6 Wheels
7 Axle
8 Transport handle
9 Mains plug
10 Mounting for prodder
11 On/Off switch
12 Release screw
13 Wheel hubs
15 Hex-wrench
16 Screw for chassis assembly
17. Wheel fastening screw
18. Washer, outside
19. Sleeve
20 Shredded material debris box
21 Foot
22 Screws for fi tting the foot
23 Guide rail
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Anl_GC_KS_2540_CB_GB_Korea.indb 8Anl_GC_KS_2540_CB_GB_Korea.indb 8 02.12.2022 11:12:1502.12.2022 11:12:15

EINHELL GC-KS 2540 CB Specifications

General

Brand	EINHELL
Model	GC-KS 2540 CB
Category	Paper Shredder
Language	English