EINHELL GC-KS 2540 Operating Instructions

GB
- 15 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock,  re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Explanation of the symbols used (see Fig. 10)
1. Important! Read the operating instructions
and follow the warnings and safety instruc-
tions
2. Danger - rotating cutters. Keep your hands
and feet away from the openings when the
machine is running.
3. Important! Keep other persons and animals
away from the danger zone.
4. Important! Protect the machine from the
damp and never expose it to rain.
5. Important! Always wear safety goggles, ear
muff s, protective gloves and heavy-duty work
clothes!
6. Switch off the machine and pull the power
plug before making adjustments, cleaning the
machine or if the cable is tangled or dama-
ged.
7: Wait until all parts of the machine have come
to a complete stop before touching them.
8. Protection class II; double-insulated
9. Noise emission complies with Directive
2000/14/EC!
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1 Loading funnel inlet
2 Loading funnel
3 Motor housing with cutter plate
4 Prodder
5 Complete chassis
6 Wheels
7 Axle
8 Transport handle
9 Mains plug
10 Mounting for prodder
11 On/Off switch
12 Release screw
13 Wheel hubs
15 Hex-wrench
16 Screw for chassis assembly
17. Wheel fastening screw
18. Washer, outside
19. Sleeve
20. Shredded debris bag
2.2 Items supplied
Please check that the article is complete as
speci ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Garden shredder
•
Pusher
•
Shredded debris bag
•
Original operating instructions
Anl_GC_KS_2540_SPK9.indb 15 20.12.2018 09:19:48

EINHELL GC-KS 2540 Specifications

General

Power	2000 W
Noise level	106 dB
Product color	Black, Red
Cutting system	Blade
AC input voltage	220-240 V
Rated speed (max)	3800 RPM
AC input frequency	50 Hz
Material throughput	- kg/h
Collection box capacity	- L
Maximum branch thickness	40 mm
Package depth	420 mm
Package width	300 mm
Package height	620 mm
Package weight	11600 g

Weight and Dimensions

Depth	625 mm
Width	290 mm
Height	423 mm
Weight	9900 g