EINHELL GC-RS 60 CB User Manual

GB
- 9 -
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
•
Safety instructions
3. Proper use
This electric garden refuse shredder is designed
only for shredding organic garden waste. Place
biologi-cally degradable material, e.g. leaves,
branches, dead fl owers etc., into the loading fun-
nel inlet.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage: .......................................... 220 V ~ 60 Hz
Power rating: ..................................2800 W (P40)
................................................................. 2300 W
Protection type: ............................................. IP24
Cutting unit idling speed ..........................40 min
-1
Branch diameter: ..............................max. 45 mm
L
pA
sound pressure level: ................... 81.3 dB (A)
K uncertainty .................................... 0.99 dB (A)
L
WA
sound power level: ......................... 92 dB (A)
Weight: ........................................................31 kg
Protection class:.................................................. I
Operating mode P40: Continuous operation with
idling (cycle time 10 minutes). To ensure that the
motor does not become excessively hot it may
only be operated for 40% of the cycle at the spe-
cifi ed rating and must then be allowed to idle for
60% of the cycle.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
1. Screw the motor unit (Fig. 4/Item 1) and the
base frame (Fig. 4/Item 3) together. Use the
screws (Fig. 3/Item 11+12+13) and washers
(Fig. 5a+5b/Item 13) to do so.
2. Fit the wheels to the base frame. To do so,
slide one sleeve each into the hole in each
of the wheels (Fig. 6). Then insert one screw
with washer through each sleeve (Fig. 7) and
screw the wheels to the base frame (Fig. 8).
Anl_GC_RS_60_CB_GB_Korea.indb 9Anl_GC_RS_60_CB_GB_Korea.indb 9 07.02.2023 09:17:4607.02.2023 09:17:46

EINHELL GC-RS 60 CB Specifications

General

Brand	EINHELL
Model	GC-RS 60 CB
Category	Paper Shredder
Language	English