EINHELL GE-EM 1233 User Manual

GB
- 30 -
11. Troubleshooting
Fault Possible causes Remedies
The motor fails to
start
a) The capacitor is defective
b) There is no electricity at the plug
c) The cable is defective
d) The combined switch/plug is de-
fective
e) The connectors have become
separated from the motor or the
capacitor
f) The mower is standing in high
grass
g) The mower housing is clogged
a) The mower housing is clogged.
Have repaired by the Customer
Service Center
b) Check the cable and the fuse
c) Check the cable
d) Have repaired by the Customer
Service Center
e) Have repaired by the Customer
Service Center
f) Start in low grass or on an area that
has already been mowed; change
the cutting height if necessary
g) Clean the housing so that the blade
moves freely
The motor perfor-
mance drops
a) The grass is too high or too damp
b) The mower housing is clogged
c) The blade is severely worn
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
Cutting is irregular a) The blade is worn
b) Wrong cutting height
a) Replace or resharpen the blade
b) Correct the cutting height
Anl_GE_EM_1233_M_SPK1.indb 30Anl_GE_EM_1233_M_SPK1.indb 30 09.09.13 18:0909.09.13 18:09

EINHELL GE-EM 1233 Specifications

General

Type	Push lawn mower
Cutting width	330 mm
Grass catcher	Yes
Cutting height	60 mm
Cutting system	-
Number of wheels	4 wheel(s)
Recommended lawn area	600 m²
Minimum cutting height	20 mm
Grass collecting volume	30 L
Cutting clearance adjustment	5
Power source	AC
AC input voltage	230 V

Weight and Dimensions

Depth	675 mm
Width	382 mm
Height	290 mm
Weight	11100 g