EasyManua.ls Logo

EINHELL GE-EM 1843 HW - User Manual

EINHELL GE-EM 1843 HW
114 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GE-EM 1843 HW M
GE-EM 1843 HW M
Art.-Nr.: 34.001.81 I.-Nr.: 11025
Art.-Nr.: 34.001.82 I.-Nr.: 11025
7
D Originalbetriebsanleitung
Elektro-Rasenmäher
GB Original operating instructions
Electric Lawn Mower
F Mode d’emploi d’origine
Tondeuse à gazon électrique
I Istruzioni per l’uso originali
Tosaerba elettrico
S Original-bruksanvisning
Elgräsklippare
NL Originele handleiding
Elektrische gazonmaaier
SLO Originalna navodila za uporabo
Električna kosilnica
GR Πρωτότυπες Οδηγίες χρήσης
Ηλεκτρικό χλοοκοπτικό
Anl_GE_EM_1843_HW_M_SPK7.indb 1Anl_GE_EM_1843_HW_M_SPK7.indb 1 24.06.15 09:0424.06.15 09:04

Table of Contents

Questions and Answers

  • B
    Bradley MossAug 11, 2025
    What to do if my EINHELL GE-EM 1843 HW Lawn Mower motor fails to start?
    • W
      Warren McgrathAug 11, 2025
      If the EINHELL Lawn Mower motor fails to start, it could be due to several reasons. First, ensure there's electricity at the plug by checking the cable and fuse. If the mower is in high grass, try starting in a low grass area or adjust the cutting height. Also, a clogged mower housing can prevent starting, so clean the housing to allow the blade to move freely. Other potential issues include a defective capacitor, cable, or combined switch/plug, or disconnected connectors, all of which should be repaired by a qualified service center.
  • L
    Lindsey FloresAug 20, 2025
    Why is the motor performance dropping on my EINHELL Lawn Mower?
    • D
      Desiree AndersonAug 20, 2025
      If the motor performance of your EINHELL Lawn Mower drops, it might be because the grass is too high or damp; in this case, correct the cutting height. Alternatively, the mower housing could be clogged, requiring cleaning. A severely worn blade can also cause performance drops, so consider replacing it.
  • S
    Sean GomezAug 30, 2025
    How to fix irregular cutting with my EINHELL GE-EM 1843 HW Lawn Mower?
    • M
      Melissa MilesAug 30, 2025
      Irregular cutting with your EINHELL Lawn Mower can occur if the blade is worn, so replace or resharpen the blade. Also, check and correct the cutting height, as the wrong height can lead to uneven cutting.

EINHELL GE-EM 1843 HW Specifications

General IconGeneral
Power SourceElectric
Motor Power1800 W
Cutting Width43 cm
Cutting Height AdjustmentCentral
Cutting Height Range25-75 mm
Grass Box Capacity50 L

Related product manuals