EINHELL GE-EM 1843 HW User Manual

GB
- 30 -
11. Troubleshooting
Fault Possible causes Remedies
The motor fails to
start
a) The capacitor is defective
b) There is no electricity at the plug
c) The cable is defective
d) The combined switch/plug is de-
fective
e) The connectors have become
separated from the motor or the
capacitor
f) The mower is standing in high
grass
g) The mower housing is clogged
a) The mower housing is clogged.
Have repaired by the Customer
Service Center
b) Check the cable and the fuse
c) Check the cable
d) Have repaired by the Customer
Service Center
e) Have repaired by the Customer
Service Center
f) Start in low grass or on an area that
has already been mowed; change
the cutting height if necessary
g) Clean the housing so that the blade
moves freely
The motor perfor-
mance drops
a) The grass is too high or too damp
b) The mower housing is clogged
c) The blade is severely worn
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
Cutting is irregular a) The blade is worn
b) Wrong cutting height
a) Replace or resharpen the blade
b) Correct the cutting height
Anl_GE_EM_1843_HW_M_SPK7.indb 30Anl_GE_EM_1843_HW_M_SPK7.indb 30 24.06.15 09:0524.06.15 09:05

EINHELL GE-EM 1843 HW Specifications

General

Brand	EINHELL
Model	GE-EM 1843 HW
Category	Lawn Mower
Language	English