To Next PageTo Next PageWhy does my EINHELL RG-EM 1843 HW motor performance drop?
A drop in motor performance can be attributed to several reasons. The grass might be too high or too damp, in which case you should correct the cutting height. Another cause could be a clogged mower housing, so clean the housing. Finally, the blade may be severely worn, requiring you to replace it.
How to fix irregular cutting with my EINHELL RG-EM 1843 HW Lawn Mower?
Irregular cutting can occur if the blade is worn, so replace or resharpen the blade. Also, wrong cutting height may be the reason, so correct the cutting height.
What to do if my EINHELL Lawn Mower motor fails to start?
If the motor fails to start, several factors could be at play. It could be due to a defective capacitor, in which case you should have it repaired by the Customer Service Center. Another reason might be that there is no electricity at the plug, so you should check the cable and the fuse. A defective cable or combined switch/plug could also be the cause, and you should check the cable or have the switch/plug repaired by the Customer Service Center, respectively. The connectors may have become separated from the motor or the capacitor, requiring repair by the Customer Service Center. Additionally, the mower might be standing in high grass, so start in low grass or on an area that has already been mowed, changing the cutting height if necessary. Lastly, the mower housing could be clogged, so ...
General| Brand | EINHELL |
|---|---|
| Model | RG-EM 1843 HW |
| Category | Lawn Mower |
| Language | English |
