EINHELL RASARRO User Manual (English)

Questions and Answers:

M
Michael BonillaJul 27, 2025
Why won't my EINHELL RASARRO Lawn Mower motor start?
- B
  Bryce MorrisJul 27, 2025
  If the EINHELL Lawn Mower motor won't start, several factors could be at play. It might be due to disconnected motor terminals, which should be repaired by the Customer Service Center. Alternatively, the mower might be standing in high grass; try starting it in low grass or on an area that's already been mowed, adjusting the cutting height if needed. A clogged mower housing can also prevent starting, so ensure the blade moves freely by cleaning it. Also, make sure the safety switch and the battery are correctly inserted. Finally, check for insufficient contact between the handle and the handle fastener; clean the contacts and tighten the handle connection.
J
Jeff JohnsonAug 7, 2025
Why is my EINHELL RASARRO motor performance dropping?
- S
  Scott SandersAug 7, 2025
  If your EINHELL Lawn Mower's motor performance is decreasing, it could be due to several reasons. The grass might be too high or damp, so correct the cutting height. Also, check if the mower housing is clogged and clean it if necessary. A severely worn blade can also cause performance issues, so consider replacing it. Finally, check the battery performance and charge if required.
C
Cassandra PettyAug 17, 2025
What to do if EINHELL Lawn Mower cutting is irregular?
- S
  Susan HowardAug 17, 2025
  Irregular cutting with your EINHELL Lawn Mower can stem from a worn blade; replace or resharpen it. Another potential cause is an incorrect cutting height, which you should adjust accordingly.

EINHELL RASARRO Specifications

General

Type	Push lawn mower
Motor type	Brushless
Cutting width	380 mm
Grass catcher	Yes
Product color	Black, Red
Rotational speed	3400 RPM
Maximum lawn area	450 m²
Handle(s) features	Foldable
Rear wheels diameter	220 mm
Front wheels diameter	150 mm
Maximum cutting height	75 mm
Minimum cutting height	25 mm
Grass collecting volume	45 L
Number of height positions	6
Cutting clearance adjustment type	Stepped
Power source	Battery
Battery voltage	18 V
Battery capacity	4 Ah