EINHELL GH-BC 33-4 S User Manual

GB
- 31 -
Putting the equipment back into operation
1. Remove the spark plug (see section 9.4).
2. Clean the spark plug and check that the
electrode gap is correct, or insert a new spark
plug with the correct electrode gap.
10.3 Transport
To transport the machine, empty the petrol tank
as described in section 10. Clean coarse dirt off
the equipment with a brush or hand brush. Dis-
mantle the drive rod mechanism as described in
section 5.1.2.
10.4 Ordering spare parts
Please provide the following information on all
orders for spare parts:
•
Model/type of the equipment
•
Article number of the equipment
•
ID number of the equipment
•
Part number of the required spare part
11. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Defective components must be dispo-
sed of as special waste. Ask your dealer or your
local council.
Anl_SA_GH_BC_33_4_S_SPK8.indb 31Anl_SA_GH_BC_33_4_S_SPK8.indb 31 11.05.16 09:0211.05.16 09:02

EINHELL GH-BC 33-4 S Specifications

General

Power source	Gasoline
Line diameter	2.5 mm
Product color	Black, Red
Rotational speed	7500 RPM
Secondary handle	Yes
Line length supplied	4 m
Cutting diameter (max)	255 mm

Weight and Dimensions

Weight	9000 g